HoMedics Mirra PURITY WFL-220 Manual page 3

WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN
CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING.
• Always place fountain on a firm, flat surface. Due to
the imperfect edges that are inherent to our natural
stone fountains, water may splash outside the base
of the unit. Therefore, we strongly recommend that
you place your fountain and fountain parts on a
waterproof surface or that you cover the surface
with a waterproof barrier.
• DO NOT place on any surface that can be damaged
by water.
• DO NOT reach for a unit that has fallen into water.
Unplug it immediately.
• DO NOT place or drop into water or other liquids.
• DO NOT use water above 86°F.
• Use this unit only for its intended purpose as described
in this document, the Quick–Start Guide and User
Guide.
• DO NOT use attachments not recommended by
MIRRA or HoMedics; specifically, any attachments
not provided with this unit.
• NEVER drop or insert any object into any opening.
• DO NOT place the fountain near heat sources, such
as a stove.
• Always keep the cord away from high temperature
and fire.
• To disconnect, turn all controls to the off position,
then remove the plug from the outlet.
• DO NOT use outdoors. For indoor use only.
• Never cover the unit while it is operating.
• Perform regular maintenance on the fountain.
• Never use detergent to clean the fountain.
• Never clean the fountain by scraping with a hard
object.
• DO NOT attempt to adjust or repair the unit. Servicing
must be performed by professional, qualified
personnel.
• Stop using this unit if there is an unusual noise or smell.
• Unplug this unit when not in use for a long period of
time.
• DO NOT clean, adjust, or move the fountain, or
place hands into the water of the fountain without
first unplugging it from the electrical outlet.
• Keep this unit out of reach of children.
www.homedics.com
• Never let the pump run dry, as this will shorten the life
• Operate pump completely submerged for proper
• To ensure quiet operation of pump, you must rinse
• DO NOT carry this appliance by the power cord or
• Operate with tap or distilled water.
• The pump must be completely submerged in water.
• The electric cord of this product cannot be replaced.
US: 1-800-466-3342 CAN: 1-888-225-7378
of the pump.
cooling.
off all surfaces of your fountain, including the rocks
(if provided with your model) before using the first
time. Any dirt or residue that remains on the fountain
surface may obstruct the water flow through your
pump, thereby causing unnecessary noise.
use the cord as a handle.
If the pump is making noises, most likely it is not
completely submerged in water.
If it sustains damages, you must stop using the
product immediately and contact MIRRA Consumer
Relations (see Warranty section for Consumer
Relations contact information).
IB-WFL220