Join Net - Honeywell EchoView User Manual

The screen shows the PAN ID, with the cursor blinking on the first digit. Step through the digits from
left to right by pressing [MODE]. Change a digit's value by pressing [Y/+] to increase and [N/-] to
decrease. After the third digit, you see a flashing "?"
Save your changes by pressing [Y/+].
•
• Exit without saving changes by pressing [N/-].
Step back to the first digit by pressing [MODE].
•
Note: If you do not press a key within 60 seconds, the screen reverts to the programming Menu
screen showing Settings, Modem, and Exit.

7.2.3. Join Net

This screen is for joining an existing network. When you see this screen, press [MODE] to form a
network. This function allows the radio to scan all available channels and choose the least-
congested one:
The screen now displays a message asking if you want to confirm your choice to join a network:
• Press [Y/+] to join a network and automatically find the best channel to operate on.
• Press [N/-] to exit without joining a network.
While the instrument starts joining a network, this message appears:
Once the device has selected the least-congested channel and a network is joined, this message is
displayed:
EchoView User's Guide
25