Adding Multi-Tablets; Programme Selection Mode; Starting A Programme - Zanussi ZDF22002WA User Manual

ADDING MULTI-TABLETS

• Do not fill the salt container and the rinse aid dispenser.
• Set the rinse aid dispenser to the lowest position.

PROGRAMME SELECTION MODE

The appliance must be in Programme selection mode to start a programme. If the control panel does not
show this condition, do the Reset.
Press and hold simultaneously Delay and
RESET
With Reset you can cancel the running programme or the delay start. The appliance goes back to the
Programme selection mode.

STARTING A PROGRAMME

1
2
until the appliance is in programme selection mode.
11