Sneak-A-Cup; Setting Clock/Timer & Auto Brewing - Black & Decker MGD300 Owner's Manual

5. Replace the Carafe on the "Keeps Hot" plate when not serving to keep
coffee hot.
6. Press "On/Off" when done. The Coffeemaker will keep coffee warm for
2 hours before it shuts off automatically.

SNEAK-A-CUP

®
The Sneak-a-Cup
brewing is done. There is an automatic drip stop that lets you remove the
Carafe to "sneak-a cup" without leaking from the Filter Basket.
NOTE: The Carafe must be replaced under the Filter Basket within
one minute to prevent the Basket from overflowing.
SETTING THE CLOCK/TIMER & AUTO BREWING
When you plug in the unit, the clock will flash 12:00 a.m. until the correct
time is set. The Coffeemaker will work without setting the clock.
1. To set the current time of day: press the HOUR button until you
reach the correct hour. Watch for the
little dot in the top left corner of
the display that indicates "p.m."
time. Press the MINUTES
button to set the correct
minutes. (A) Once set, the
clock will continue to keep
time unless the Coffeemaker
is unplugged or there is a
power failure. If not set, the clock
will continue flashing 12:00 a.m.
2. To set the auto on time: press the PROGRAM button and the light
under the AUTO ON button will start flashing indicating it is being
programmed. Press the HOUR, then MINUTES buttons to set the time
you'd like coffee to automatically begin brewing (for example 7:15
a.m.). Watch for the "p.m." indicator dot at the top left of the digital
display. When you're done, press the AUTO ON button. The AUTO ON
light will stop flashing and remain on to show the timer is activated.
Your AUTO ON time (7:15 a.m.) will be set.
3. Prepare the Coffeemaker for brewing as instructed in BREWING COFFEE.
4. To check your pre-set auto time, press PROGRAM and it will display
with a light flashing under AUTO ON. When the light stops flashing,
the clock will return to the current time of day. Press AUTO ON to
reactivate the timer. To automatically brew coffee again at the same
pre-set auto-on time the next day, prepare your Coffeemaker for
brewing again and press the AUTO ON button.
Note: The auto-on function can be canceled at any time by pressing the
AUTO ON button a second time. The AUTO ON light will go out.
® Interrupt Feature lets you pour a cup of coffee before
5
A