Download Character Commands - Star Micronics NX-2400 User Manual

Select graphics mode
Mode ASCII
Decimal Hexadecimal
IBM
< ESC > "[" "g" nl
27 91 103 nl 1B SB 67 nl
n2 mO ml
m2
n2
m0 ml m2... n2 m0 ml m2...
Selects one of eight graphics modes depending
on the value of m0 and
prints dot graphics in this mode. The graphic
image is (nZ + n2 x 256)
- 1 dots wide. See < ESC> "K" (for 8-bit graphics) or < FS> "Z"
(for 24-bit graphics) for information
on ml, m2, . . .
m0
0
1
2
3
8
9
11
12
Graphics mode
8-bit Single-density
( 60 dots per inch)
S-bit Double-density (120 dots per inch)
8-bit Double-density, double-speed
8-bit Quadruple-density 040 dots per inch)
24-bit Single-density
( 60 dots per inch)
24-bit Double-density
(120 dots per inch)
24-bit Triple-density
(180 dots per inch)
24-bit Hex-density
(360 dots per inch)
Convert graphics density
Mode
ASCII Decimal Hexadecimal
Both
<ESC> "y n
m
27 63
n m
1B 3F
n m
Converts graphics defined by subsequent < ESC > "K", < ESC > "L",
< ESC > "Y" or < ESC > "Z' commands to a density mode defined
by <ESC>
"*,,. n is "K", "L", "Y" or "Z", indicating
the mode to be
converted. m is a code from < 0 > to < 4 > or < 6 > indicating one of
the modes of < ESC > "*".
DOWNLOAD CHARACTER COMMANDS
Copy standard characters from ROM into RAM
Mode ASCII Decimal
Hexadecimal
Std. < ESC > ":" <O> <O> CO> 27 58 0 0 0 1B3A 00 0000
IBM <FS> ":" <O>
-=O> <O> 28 58 0 0 0 1C 3A 00 00 00
Copies all the standard characters to the corresponding download char-
acter RAM area, overwriting any download data already present. Ignored
when DIP switch 2-1 is ON.
81