Chevrolet Low Cab Forward 4500 2019 Series Owner's Manual page 27

26 Keys, Doors, and Windows
2. Remote Control Cover
Notch
3. Remote Control Unit Cover
4. Remote Control Unit
5. Battery
1. Pry open the remote control
unit cover (3) by inserting a flat
head screwdriver or similar tool
into the notch of the remote
control unit cover (2). Wrap a
piece of cloth or tape around
the tip of the screwdriver so as
not to damage the remote
control unit cover (3).
2. Remove the battery cover (1).
3. Insert a flat head screwdriver
or similar tool into the recess of
the remote control unit (4) to
remove the old battery.
4. Insert the new battery into the
remote control unit (4) with its
positive side visible, and press
the battery downward until fully
seated.
5. Install the remote control
unit (4), battery (5), and battery
cover (1) in their original
positions inside the remote
control unit cover (3).
6. Close the remote control unit
cover (3).
When closing the remote control
unit cover (3), check that there is no
dust, hair, or anything else caught
underneath it. A poorly sealed
remote control unit could become
deteriorated.
Please comply with the collection
system available in your country for
the disposal of old batteries. In
addition, take special care to
prevent any danger to children.