Samsung RSJ1K Series Service Manual page 40

DISASSEMBLY & REASSEMBLY
PART NAME
CoolSelect
Zone
Display &
Room
Lamp
FIGURE
Remove 2 screws as indicated.
Pull out the CoolSelect Zone Assembly and
disconnect the connector as shown.
Remove the Tray Convertible Assembly with
pulling out to the front.
Remove the Case Room Lamp located at
inner place of CoolSelect Zone.
Disconnect the connector of the Room Lamp
with pushing it and taking it out.
Push the 4 Hooks to the another side with
flat head driver and take it out.
40
DESCRIPTION
Be careful of injury.
Be careful not to scratch.
Be careful of injury.