Fujitsu LifeBook N Series Manual page 61

Symptom
The remote control
doesn't work
(Continued)
When you attempt
to start Instant
MyMedia, the
notebook starts
instead
Only certain remote
control buttons
respond
Recording can't be performed
Recording does not
start, even when the
[REC] button on the
remote control is
pressed.
A message
indicating that no
disc is inserted is
displayed when the
[REC] button on the
remote control is
pressed.
Possible Cause
AC adapter for the notebook is
not connected properly.
Strong irradiated light from
fluorescent lamps are exposed
to the IR port.
The signals from the remote
control do not reach the IR port
on the notebook.
The notebook is in Standby
mode.
The BIOS setting for Instant
MyMedia is disabled.
TV broadcasts are being
recorded.
The DVD-RAM disc is not
recognized.
A disc other than a DVDRAM
disc is installed.
The disc is not inserted correctly.
The drive tray is not closed.
TV Tuner User's Guide
Remedies
Properly connect
the AC adapter.
Change the
orientation or
location of the
notebook.
Position the remote
control so it is in
line-of-sight of the
IR port.
Power down the
notebook.
Change the BIOS
setting of Instant
MyMedia.
During recording,
most buttons are
disabled, with the
exceptions of
volume and pause.
It takes time for the
notebook to identify
a DVD-RAM disc.
Press the [REC]
button again after
the "loading the
disc" message or
the recordable time
indicator has
disappeared.
Instant MyMedia will
only record on
DVDRAM discs.
Use a DVD-RAM
disc.
Verify that the disc
is inserted properly
Check that the disc
is lying flat in the
media tray and
close the tray.
Reference
Refer to your
notebook's user
guide.
...
...
Refer to your
notebook's user
guide.
Refer to your
notebook's user
guide.
...
...
...
Refer to your
notebook's user
guide.
Refer to your
notebook's user
guide.
53