Back/Top Panel Components - Fujitsu LifeBook N Series Manual

USB Ports
DC Power Jack

Back/Top Panel Components

The following is a brief description of your
LifeBook notebook's back panel components.
(Figure 2-6)
USB Ports
The four USB 2.0 ports (three on the rear, one
on the left side) allow you to connect Universal
Serial Bus devices.
External Monitor Port
The external monitor port allows you to connect
an external monitor.
LAN Jack (RJ-45)
The LAN jack is designed to accept a Local Area
Network (LAN) RJ-45 plug.
Modem (RJ-11) Telephone Jack
The Modem (RJ-11) telephone jack is for
attaching a telephone line to the internal modem.
The internal modem is not intended for use
with Digital PBX systems. Do not connect the
internal modem to a Digital PBX as it may
cause serious damage to the internal modem
or your entire LifeBook notebook. Consult
your PBX manufacturer's documentation for
details. Some hotels have Digital PBX
systems. Be sure to find out BEFORE you
connect the modem.
External Monitor
Port
S-Video Out Port
Figure 2-6. LifeBook notebook back/top panel
G e t t i n g t o K n o w Yo u r C o m p u t e r
Air Vents
Air Vents
The air vents are used to cool the system to
prevent overheating.
Do not obstruct the air vents while the system
is running; doing so could cause your system
to overheat.
S-Video Out Port
The S-Video output is used to transmit a higher
resolution video signal to a compatible TV or
VCR.
DC Power Jack
The DC power jack allows you to plug in the AC
adapter to power your LifeBook notebook and
charge the internal Lithium ion battery.
LAN Jack (RJ-45)
Modem Port (RJ-11)
11