Printer Mechanism Disassembly - Epson LQ-1050 Technical Manual

REV.-A

4.2.4.13 Printer Mechanism Disassembly

1. Remove the printer mechanism (Refer to Section 4.2.4.1.).
2. Remove the printhead (Refer to Section 4.2.4.2.).
3. Remove the carriage motor (Refer to Section 4.2.4.4.).
4. Remove the belt-driven pulley (Refer to Section 4.2.4.5.).
5. Remove the paper feed motor (Refer to Section 4.3.4.7.).
6. Cut wire clumps fix cables to the base frame.
7. Remove the adhesive tape.
8. Remove the home position sensor, platen gap sensor, and plunger cables from the base frame.
Fig. 4-35. Adhesive Tape and Cable Positions on the Base Frame
Fig. 4-34. Wire Clump Positions
Home Position
Platen Gap' Sensor Cable
4-28
k.
Adhesive
Plunger Cable