Melitta LOOK AQUA Operating Instructions Manual page 6

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6
liquids in it.
• Do not overfill the kettle.
There is a risk of scalding due
to water possibly bubbling over.
Please refer to the operating
    GB
instructions or the level indica-
tors on your appliance for the
maximum filling level.
• Use the kettle only with the
corresponding base unit.
• Do not use the kettle without
the limescale filter strainer.
• Do not use the kettle without
the lid.
• Do not open the lid while heat-
ing.
• During use, parts of the kettle
become very hot. Avoid touch-
ing these parts and avoid con-
tact with the hot steam.
• After use, the surface of the
heating element still has residu-
al heat. Avoid contact with the
inner surfaces of the device.
• Always unplug the unit from
the power supply before assem-
bling, disassembling or cleaning,
and when not under supervi-
sion.
• Never immerse the kettle in
water.
• Do not allow the power cable
to come into contact with liquids.
• Do not use the kettle if the
power cable is damaged.
• Do not clean parts that come
into contact with food with
aggressive cleaning agents or
scouring milk. Remove deter-
gent residues with clean water.
Further information on cleaning
can be found under "Cleaning
and care".
6
• This appliance may be used by
children 8 years of age or older
if they are supervised or have
been instructed in the safe use
of the appliance and have un-
derstood the hazards involved.
• Cleaning and maintenance must
not be carried out by children
unless they are 8 years or older
and are supervised.
• Keep the appliance and power
cord away from children under
8 years of age.
• The device may be used by
people with reduced physi-
cal, sensory or mental abilities
or lack of experience and/or
knowledge if they have been
supervised or instructed in the
safe use of the device and have
understood the resulting hazards.
• Do not allow children to play
with the kettle.
• Replacement of the power
cable and any other repairs
must only be carried out by
Melitta
Customer Service or
®
an authorised workshop.
Before first use
1. Ensure that the power supply in your home
corresponds to that on the model plate on the
base of the applianc.
2. Connect the base unit to a power source. Unused
cable can be stored in the base of the appliance .
3. All kettles have been tested during production to
ensure they work perfectly. Therefore there may
be remaining water deposits. Clean the appliance
before use by boiling the maximum amount of
water twice.
Usage of the electric kettle
1. Open the lid by pressing the button . Lid is not
removable.
2. Fill in needed amount of water. The water amount
is readable on the water level scale on right and left
side of the handle .
• Do not fill the kettle beyond the maximum
capacity (Capacit max. 1,7 l).
• Do not put kettle into operation without water.

Advertisement

Table of Contents
loading

Table of Contents