ARRI ALEXA Mini LF User Manual page 76

Monitoring
Configuration of Overlays
1. Select MENU > Monitoring > EVF/Monitor > EVF Overlays.
Select MENU > Monitoring > EVF/Monitor > Monitor Overlays.
Select MENU > Monitoring > SDI > SDI Processing > SDI Overlays.
Following settings are available:
Frame Lines
Frame Line Shading
Center Mark
Surround Mask
Status Info
Configuration of Status Info Components
1. Select MENU > Monitoring > EVF/Monitor > EVF Overlays > Status Components.
Select MENU > Monitoring > SDI > SDI Processing > Overlays > Status Components.
2. Following settings are available:
Info 1
Info 2
Timecode
Audio
Lens Data
Lens Focus Distance
UDM
Sets frame lines on or off. Used as a framing reference tool with
typically an image frame, a center mark and aspect ratio. For infor-
mation on setting frame lines, see "Setting frame lines".
Applies an outside shading to the area between the frame line and
the remaining active image area.
Sets the center mark between Off, Dot, Small Dot, Cross or Small
Cross.
Select to adjust the surround mask settings. If surround view is set
to On, it must be separated from the recorded image area to allow
proper framing, either as black line, colored line, or semi transpar-
ent with 25, 50, 75 or 100% percent opacity (opacity selection is not
available for the MVF-2 flip-out monitor).
Only for EVF and SDI. Sets camera status overlays between Off,
Overlay (status on the active image), or Safe (status outside the ac-
tive image).
Enables/disables the top and bottom section of the status info.
Enables/disables the left and right section of the status info.
Enables/disables display of the timecode on the bottom right of the
image.
Enables/disables display of the audio levels located on the lower
right side of the image.
Enables/disables iris and focal length readings.
Sub-option of lens data setting. Enables/disables display of focus
distance readings (19), located on the lower left corner of the im-
age.
Sub-option of lens focus distance setting. Enables/disables display
of distance readings from the Ultrasonic Distance Measure UDM-1
(in combination with LCUBE CUB-1). Located above the lens focus
distance overlay.
76