Table of Contents
Advertisement
Troubleshooting
Before sending the product for repair, refer to the following checklist to resolve the problem.
If the problem persists, contact an authorized Olympus service center.
In addition, be sure to back up the data in your m:robe before sending this product for repair
or service. Writing to the memory or deleting data etc., may be necessary during the repair
or service. Due to copyright restrictions, we cannot copy stored data for repair or service.
Restoring the data is not possible. We also recommend backing up your data often to prevent
data loss problems.
Problem
The power cannot be
turned on.
The player turns off
automatically.
The m:robe functions
cannot be operated.
The device becomes
hot.
74
Cause
The HOLD function
is set to on.
"Auto PWR Off" or
"Sleep Mode" is set.
The "Auto PWR Off"
or "Sleep Mode" is
activated.
The HOLD function
is set to on.
The temperature of
the device increases
after extended periods
of operation.
Resolution
Slide back the HOLD switch to release
the HOLD function, then press and
hold the
button (g page 31).
Set the "Auto PWR Off" or "Sleep
Mode" to "Off" or set the desired time
(g page 67).
Press and hold the
the power on (g page 24).
Slide back the HOLD switch to release
the HOLD function (g page 31).
This is not a malfunction.
button to turn
Advertisement
Table of Contents
