Inserting And Removing The Sprint Mobile Broadband - Novatel MERLIN EX720 User Manual

five minutes. You may stop the installation at any time by
clicking Cancel.
Caution:
3.
Once the firmware has been successfully downloaded, a
confirmation screen appears. Click OK to return to the
Sprint Connection Manager main user interface.
4.
When the firmware update is completed, it will reset the card.
Please wait a few minutes to initialize the card from the
network. If the card has not been activated, it will
automatically launch the Sprint Vision Activation Wizard.
Note: During this time, the Sprint Connection Manager message
area displays "Updating Hardware" and the Go button is
disabled.
Once the card is provisioned successfully, it will start IOTA
(Internet Over-the-Air) Activation to update your user profile from
the network settings. If the card is not provisioned or out of the
Sprint coverage area, the Sprint Vision User Interface will display
"Sprint Vision: Searching for service...".
Inserting and Removing the Sprint Mobile
Broadband Express Card
Inserting the Sprint Mobile Broadband Express Card
Before you insert the card, you must first install Sprint Connection
Manager (see page 18 in this section). Once you have completed
the software installation procedure, you may insert your card into
your computer's Express Card slot or card bay.
Section 2A: Installing the Sprint Mobile Broadband Express Card 21
Do not remove the card from your computer until the
installation process is complete. Interrupting this process
may cause permanent damage to your card.