Installing The Sprint Connection Manager Software - Novatel MERLIN EX720 User Manual

Installing the Sprint Connection Manager
Software
Follow the instructions below to install the Sprint Connection
Manager Software from the installation CD. This process requires
you to restart your computer at the end of the installation;
therefore, we recommend that you quit all open applications
before you begin installation. The Sprint Connection Manager
Software automatically determines your computer's operating
system and installs all appropriate software.
Note: You may be required to log in with administrative privileges,
depending on your operating system, to install the Sprint
Connection Manager Software.
Installing the Sprint Connection Manager Software and the Sprint
Mobile Broadband Express Card driver:
1.
Insert the installation CD into your CD-ROM drive. The
Setup program should start automatically. If it does not,
select Start > Run and enter d:\Autorun.exe, where d is
your CD-ROM drive letter.
2.
Select Install Sprint Mobile Broadband (Novatel Wireless).
(The InstallShield® Wizard will start and guide you
through the installation process.)
3.
Use the Next and Back buttons to navigate through the
installation wizard, noting the following:
In order to continue with the installation, you must
select "I accept the terms of the License Agreement."
Select the default option, Sprint Mobile Broadband
Express Card by Novatel Wireless, Inc., if prompted,
and click Next.
Please wait a few minutes while the software
installs.
18 Section 2A: Installing the Sprint Mobile Broadband Express Card