Pioneer VSX-834 Instruction Manual page 47

3. If the unit is connected to the pre-main amplifier in the separate room, adjust
the volume on the pre-main amplifier. If the unit is connected to the power
amplifier or ZONE speaker in the separate room, adjust the volume on the
remote controller.
• When connecting the power amplifier, set "Zone B Output Level" to
"Variable" for "Speaker Setup" in the Initial Setup section (
setting "Zone B Output Level" from the Setup menu, press
controller, and set "2. Speaker" - "Configuration" - "Zone B Output Level"
p73) to "Variable". If it is not set, a large volume is output and the
(
power amplifier, speakers, etc. may be damaged.
• If "ZONE A+B" is selected as an audio output destination, you can select only
the "Stereo" listening mode for the main room (ZONE A) when using the 2.1ch
speaker layout. When using a speaker layout of 3.1ch or more, you can select
only the "Ext.Stereo" listening mode.
Contents Connections
≫
p88). When
on the remote
47
Playback
≫
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫