Heat & Glo MEZZO36-C Installation Manual page 14

LOFT FORGE Decorative Barrier Front
IMPORTANT! This fireplace requires an installed decorative barrier front to prevent direct contact with the
hot viewing glass. DO NOT operate the fireplace with the barrier removed.
Decorative barrier front must be ordered at time of fireplace purchase. If decorative barrier front is not
present, contact dealer.
A
B
Location
A
B
C
D
E
F
The Loft Forge decorative barrier front has an installed depth of 3/4 in. (19 mm),
measured from the front of the non-combustible finishing material to the front of the
decorative barrier front.
Figure 3.5 Loft Forge (Overlap Fit) Decorative Barrier Front Dimensions
14 Heat & Glo • MEZZO36-C/ST-C, MEZZO48-C/ST-C, MEZZO60-C/ST-C, MEZZO72-C/ST-C Installation Manual • 2600-980 Rev. D • 9/19
Barrier Mesh: Integral to
Decorative Barrier Front
MEZZO36-C
MEZZO36ST-C
Inches Millimeters Inches
26-1/4 667 26-1/4
7-1/8 181 7-1/8
36-3/4 933 48-3/4
42-3/4 1086 54-3/4
13 330
19 483
Note: See Section 10 for hearth, mantel and
finishing requirements.
C
D
MEZZO48-C
MEZZO48ST-C
Millimeters Inches
667 26-1/4
181 7-1/8
1238 60-3/4
1391 66-3/4
13 330
19 483
MEZZO60-C
MEZZO60ST-C
Millimeters
667
181
1543
1695
13 330
19 483
E
F