Miele KM 6629-1 Operating And Installation Instructions page 60

Problem solving guide
Problem
An operating noise can
be heard after the appli-
ance has been switched
off.
 alternating with 
flashes in the timer dis-
play and a buzzer
sounds.
1 and a number, e.g. 1-0
flashes alternately with
a 3 digit number in the
timer display.
 flashes alternately
with numbers in the
timer display.
60
Cause and remedy
The cooling fan runs until the hob has cooled down
and then switches off automatically.
The hob is incorrectly connected.
 Disconnect the hob from the mains electricity sup-
ply.
 Call Miele Service. The hob must be connected to
the mains according to the wiring diagram.
Cooking zone fault
 Interrupt the power supply to the hob for approx.
1 minute.
 If the problem persists after power has been re-
stored, please contact Miele.

The overheating protection mechanism has been ac-
tivated.
 See "Safety features – Overheating protection".
,  or 
The fan is blocked or defective.
 Make sure it has not been blocked by an object.
 Remove the obstruction.
 If this fault code continues to appear in the dis-
play, contact the Customer Service Department.
 and other numbers
There is a fault in the electronic module.
 Disconnect the power supply to the hob for ap-
prox. 1 minute.
 If the problem persists after power has been re-
stored, please contact the Customer Service De-
partment.