Sync Button - Atlantis Land Net Power 302AV Kit Quick Start Manual

6. SYNC Button

Sync Button is used to add a HomePlug device to a Powerline network or enable it to
join a network by pressing the Sync Button of the device to turn it into Broadcast
state or Join state.
There are 3 types of Sync Button trigger states:
1. Broadcast State: Enable NetPower 302 AV device to provide information
for another NetPower 302 AV device to join its powerline network group
(works even if it is the only device existing within the network group).
2. Join State: This allows an ungrouped NetPower 302 AV device to join an
existing powerline network group.
3. Ungroup State: Press the SYNC Button for more than 10 seconds to
detach the device from its network group.
A NetPower 302 AV device A wants to form a network
group with another NetPower 302 AV device B.
 Press the SYNC Button of device A for 2~3 seconds
to turn it into Broadcast State, you should find the
Power LED blinks steadily signifying it is in
Broadcast state.
 Press the SYNC Button of device B for 2~3 seconds
to turn it into Join State, you should find the Power
LED blinks steadily signifying it is in Join state.
 Wait for both devices to boot again (all LEDs will
turn off and on) and when the PLC LEDs of both
devices lit steadily, you will now have these devices
being in the same network group.
31