Kenwood TK-780 Programming Instructions Manual page 12

Select the voice group and press F9 to setup System Data.
Select the voice group and press F10 to setup Group Data.
From the Edit pull down menu, select Scan Information. Set Dwell Time to 0 Seconds.
+-------------------------------------+
¦ System Data
¦-------------------------------------¦
¦ System Name
¦ System Lockout
¦ Scan Weight
¦ Auto TEL Search
¦ TA Busy Ch LOut
¦ Wide/Narrow
¦ Fix ID
¦ ID
¦ Call Indicator
¦ Horn Alert
¦ Opt Signalling
¦ Block ID's
¦ Telephone
¦ TX Inhibit
¦ Decode
¦ Data System/Group
¦ Data Delay Time
+-------------------------------------+
+----------------------------------+
¦ Group Data 2
¦----------------------------------¦
¦ Encode ID
¦ Decode ID
¦ Group Name
¦ TX Power
¦ Call Indicator
¦ Horn Alert
¦ Option Signalling : [None]
¦ Group-Lockout
¦ Transpond
¦ Talk Around
¦ Compander
¦ Home Group
¦ PTT ID
¦ Data
+----------------------------------+
+----------------------------------------------+
¦ Scan Information
¦----------------------------------------------¦
¦ Scan Type : [Fix System Scan
¦ Revert Sys Type : [Last Called]
¦ Dropout Delay Time : [
¦ Dwell Time : [
¦ Look Back Time A : [0.50]s
¦ Look Back Time B : [2.00]s
¦ Revert Grp Display : [Off]
¦ Off Hook Scan : [Disable]
+-------------------------- --------------------+
¦
: [ ] ¦
: [***] ¦
: [*] ¦
: [No ] ¦
: [No ] ¦
: [Wide ] ¦
1st 2nd ¦
: [ ] [ ] ¦
: [***] [***] ¦
: [***] [***] ¦
: [****] [****] ¦
Start Stop ¦
: [ - ] ¦
: [ - ] ¦
: [ - ] ¦
Set Data System/Group to the
: [ 1 - 2 ] ¦
Voice System/Group number.
: [ 15]ms ¦
¦
: [ 2 ] ¦
: [ 2 ] ¦
: [Voice ] ¦
: [High] ¦
: [No ] ¦
: [No ] ¦
¦
: [No ] ¦
: [No ] ¦
: [No ] ¦
: [***] ¦
: [***] ¦
: [Off] ¦
Data = Yes on voice group
: [Yes] ¦
¦
] ¦
¦
3]s ¦
0]s ¦
¦
¦
¦
¦
Set Dwell Time to 0 Sec.
12