Introduction - Geemarc LoopHEAR 102 User Manual

Congratulations on purchasing your Geemarc
This is a portable induction loop system that can be used in a
variety of locations, both public and private.
This tough but light unit is easily transported and an integral
battery allows it to be freestanding. This battery is both
replaceable and rechargeable and long usage can be expected
(up to 24 hours). The loop is contained within the unit hence
there are no trailing wires. The LoopHEAR
of approximately 1m
that picks up speech and conversations. An external
microphone may be added if required (supplied). This
induction loop system is designed to assist hearing aid users
by transmitting direct to their telecoil equipped hearing aid
(which must be switched to the 'T' position).
Note: users of digital hearing aids must make sure their
aids have been programmed for use with the 'T' setting.
The outer carton has been specially designed as a handy
carrying case. It is recommended to retain this carrying case to
enable safe transportation when transporting the LoopHEAR
It is important that you read the instructions below
in order to use your Geemarc
full potential. Keep this user guide in a safe place
for future reference.
We recommend that to preserve the environment,
you switch the button on/off to off after each use. The
RED LED indicator will switch off.

INTRODUCTION

2 2
/3.3ft . There is an integral microphone
TM
LoopHEAR
RECOMMENDATION
2
TM
LoopHEAR
TM
will cover an area
TM
to its
TM
.
TM
.