Locating The Loophear Tm - Geemarc LoopHEAR 102 User Manual

The LoopHEAR
it's first use.
The WHITE LED indicatory below the
handle will light up when the battery
is charging. The LED indicator will
turn GREEN when the battery is fully
charged ... but when charging the
first time, let the battery charge for
about 8 hours before use.
Locating the LoopHEAR
In order to receive the optimal sound from the LoopHEAR
ideal location is facing the user. There are two options when
locating the LoopHEAR
Fully Portable
The LoopHEAR
without the base plate attached. It can be used in a variety of
locations with no setup required and can be used immediately.
Semi Fixed
If you want to ensure the LoopHEAR
can be used as a semi fixed unit as follows:
1) Choose the location to fix the LoopHEAR
range of coverage available (see below). Ensure you make full use
of it.
2) Remove the base plate – as described in Battery Charging above.
3) Screw the base plate to the table or desktop with the screws
provided.
4) Replace the base plate – as described in Battery Charging above.
INSTALLATION
TM
Battery will need to charge for 8 hours before
TM
TM
.
TM
can be used as a fully portable unit with or
LH102
120°
TM
stays in one place then it
TM
. Please bear in mind the
9
TM
, the
400 mA p/m
at 0.8 m