4.
Press the [VALUE] knob to confirm the range of
the factory reset.
If you decide to cancel, press the [EXIT] button.
5.
Turn the [VALUE] knob to select "YES," and then
press the [VALUE] knob.
The factory reset is executed.
NOTE
5 Never turn off the power while "EXECUTING... " is shown. Doing
so might cause all saved data to be lost.
Attaching the Rubber Feet
You can attach the rubber feet
(included) if necessary.
Attach them in the locations shown
in the illustration.
Using the unit without rubber feet
may damage the floor.
* When turning the unit over,
be careful so as to protect the
buttons and knobs from damage.
Also, handle the unit carefully; do not drop it.
To Obtain the Parameter Guide
1.
Access the following URL.
http://www.boss.info/manuals/
2.
Choose "RC-10R" as the
product name.
Appendix
21