Daikin DCG Series Service Instructions Manual page 79

ACCESSORIES WIRING DIAGRAMS
T3 L3
T2 L2
CC
T1 L1
NOTES:
1. FOR 208V OPERATION MOVE BLACK WIRE FROM H2 TO H3 ON TRANSFORMER.
406V AND 575V UNITS WILL LEAVE FACTORY WITH BK WIRE CONNECTED TO H1.
2. FOR 575V MODELS, BK WILL GO TO X1 ON TRANSFORMER AND WH WILL GO TO X3.
LEGEND:
CC - COMPRESSOR CONTACT
TRAN - OUTLET TRANSFORMER
OB - OUTLET BREAKER
GFI-CO - GROUND FAULT INTERUPTED - CONVENIENCE OUTLET
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
HIGH VOLTAGE!
DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THIS
UNIT. MULTIPLE POWER SOURCES MAY BE PRESENT. FAILURE TO
DO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
FOR UNITS WITH SERIALS BEFORE 1607
H4
RD
H3
208V
H2
230V
BK
SEE
H1
NOTE 1
46 0/575 V
X1
SEE
NOTE
2
BK
X2
X3
TRAN
POWERED CONV. OUTLET
GR
BK
GFI-CO
OB
0140L00698 REV A
GR
WH
79