Set The Date And Time - Canon FAX-L160 Starter Manual

Set Up the Machine

Set the Date and Time

Before using the machine, you MUST set the current date and time. The current date and time settings are
used as standard timer settings for functions that require them.
1
Press [Menu].
2
Press [ ] or [
SETTINGS>, then press [OK].
3
Press [ ] or [
SETTING>, then press [OK].
4
Use the numeric keys to enter the time (in 24-
hour/military time format) and date (day/
month/year), then press [OK].
Ex.
D A T E & T I M E S E T T I N G
1 5 : 5 0 3 1
If you accidently enter an incorrect number, press [
[ ] to move the cursor to the number that needs
correcting and overwrite it.
10
] to select <8 TIMER
] to select <1 DATE&TIME
1 2 ' 0 7
] or
Entering Information
●
Numeric keys: Enters numbers.
‒
[ ] or [ ]: Moves the cursor position.
‒
[OK]: Confi rms the entry.
‒
5
Press [Stop/Reset] to return to the standby
mode.
–
You can select one of the following three date
formats in <2 DATE TYPE SELECT>.
–
<DD/MM YYYY>
–
<YYYY MM/DD>
–
<MM/DD/YYYY>
–
By default, <4 DAYLIGHT SV.TIME> in the <8 TIMER
SETTINGS> menu is set to <ON>.
If you want to set <4 DAYLIGHT SV.TIME> in the <8
TIMER SETTINGS> menu to <OFF>, see Chapter 1,
"Before Using the Machine, " in the Reference Guide
The LCD display is turned off :
●
The machine may enter the sleep mode while you are setting up the
machine. Press [Energy Saver] to turn the machine back on and
continue the setup.