Panasonic Lumix S1H Operating Instructions Manual page 402

15. Menu Guide
[Photo] menu
[Focus Peaking]
402
[Focus]
[ON]/[OFF]
[SET]
During MF operation, in-focus portions (portions
on the screen with clear outlines) are highlighted
with colour.
If the [Focus Peaking Sensitivity] is adjusted to
0
the negative direction, portions to be highlighted
are reduced, allowing you to achieve a more
precise focus.
With [Display Color], you can set the display
0
colour of the in-focus portion.
When [Display While AFS] is set to [ON], the
0
Focus Peaking display is also possible when the
shutter button is pressed halfway in the [AFS]
focus mode.
You can display the Touch Tab (l 425) and then
0
touch [ ] in [
When [Rough Monochrome] of [Filter Settings]
0
is being used, [Focus Peaking] is not available.
When [Live View Boost] is being used, [Focus
0
Peaking] is not available.
0 This menu item can be registered to the Fn
button. (l 367)
[Focus Peaking
Sensitivity]
[Display Color]
[Display While AFS]
] to switch [ON]/[OFF].
—