SOYO SY-K7VTA MOTHERBOARD SY-K7VTA User Manual page 82

BIOS Setup Utility
3-7.1 PNP/PCI Configuration Controls
PNP/PCI
Controls
PnP OS
Installed
Reset
Configuration
Data
Resources
Controlled By
If [Resources Controlled By] is set to [Manual]
IRQ-# and
DMA-#
assigned to:
Under this item the user can assign an IRQ to a PCI slot. However, there under
some conditions the IRQ will not be assigned as selected under this item:
1. IRQs 0, 1, 2, 6, 8, 13 can NOT be assigned, because they are fixed.
2. IRQs 5, 9, 10, 11 are available
3. IRQs 3,4,7,12,14 and 15 will only be assigned if they are free. See the table
below on how to free them:
Setting Description
Yes Set this field to [Yes] if you
are running Windows 95,
which is PnP compatible.
No If the OS you are running
does not support PnP
configuration.
Disabled Retain PnP configuration
data in BIOS.
Enabled Reset PnP configuration data
in BIOS.
Manual BIOS does not manage PCI/ISA PnP
card IRQ assignment.
Requires to assign IRQ-# and DMA-# to PCI or
ISA PnP manually.
IRQ-3,4,5,7,9,10,11,12,14,15 assigned to: _
DMA-0,1,3,5,6,7 assigned to: _
Auto The Plug-and-Play BIOS
(ESCD) auto manages PCI/ISA PnP
card IRQ assignment
automatically.
PCI/ISA PnP Choose IRQ-# and
DMA-# assigned to
PCI/ISA PnP card.
Legacy ISA Choose IRQ-# and
DMA-# assigned to
Legacy ISA card.
78
SY-K7VTA
Note
Default
(If there is any
doubt, set this
field to [No])
Default
Recommended
IRQ-3,4,5,7,9,10,
11,12,14,15
DMA-0,1,3,5,6,7
IRQ-3,4,5,7,9,10,
11,12,14,15
DMA-0,1,3,5,6,7