Boot Up Numlock Status - SOYO SY-K7VTA MOTHERBOARD SY-K7VTA User Manual

BIOS Setup Utility

3-3.5 Boot Up NumLock Status

Boot Up
NumLock
Status
3-3.6 Gate A20 Options
Gate A20
Options
3-3.7 Typematic Settings
Typematic Settings
Typematic
Rate Setting
The following [Typematic Rate] and [Typematic Delay] fields are active
only if [Typematic Rate Setting] is set to [Enabled]
Typematic Rate
Typematic Delay
Setting
On Puts numeric keypad in
NumLock mode at boot-up.
Off Puts numeric keypad in arrow key
mode at boot-up.
Setting
Normal Lets chipset control GateA20.
Fast A pin in the keyboard controller
controls GateA20.
Setting
Disabled
Enabled
6 (Char/sec)
8 (Char/sec)
10 (Char/sec)
12 (Char/sec)
15 (Char/sec)
20 (Char/sec)
24 (Char/sec)
30 (Char/sec)
250 (msec)
500 (msec)
750 (msec)
1000 (msec)
Description
Description
Description
Keystrokes repeat at a rate
determined by the
keyboard.
When enables , the
typematic rate and
typematic delay can be
selected.
Choose the rate at which a
character is repeated when
holding down a key.
Choose how long after
you press a key down the
character begins
repeating.
61
SY-K7VTA
Note
Default
Note
Default
Note
Default
Default
Default