Rear End Panel Installation [Panel Replacement]; Symbol Mark; Installation Procedure - Mazda 6 2009 Bodyshop Manual

BODY STRUCTURE [PANEL REPLACEMENT]

REAR END PANEL INSTALLATION [PANEL REPLACEMENT]

Symbol Mark

SYMBOL MARK

Installation Procedure

1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for the plug welding before installing the new parts.
3. Apply body sealer to the joints of old and new parts for waterproofing and rust protection.
4. After temporarily installing new parts, make sure the related parts fit properly.
5. Plug weld the 6 locations indicated by (A) from the interior.
6. Plug weld the 52 locations indicated shown in the figure.
3
7
3
4
7. Install the rear end panel.
MEANING
PLUG WELDING (CO 2 ARC WELDING)
(A)3
(A)3
REAR END PANEL
18
id098008744600
am6zzb0000010
09-80B
3
7
4
3
am6xub0000002
09-80B–79