Page 1
Pediatric Injection Pediatric Injection Training Arm Simulator — LF00958U Instruction Manual DO NOT REMOVE FILM FROM TUBING! THIS PRODUCT CONTAINS DRY NATURAL RUBBER! Products by Nasco...
Page 2
About the Simulator Internal Structure The photos on the lower left show Pediatric Injectable Training Life/form ® the position of tubing embed- Arm Simulator is a dramatic and exciting ded within the arm to simulate training aid for practicing and demonstrating veins.
Page 3
Procedures That Can Be Performed CONNECT CLAMP FIRMLY CLOSED on This Simulator OPEN CLAMP A. Venipuncture C. IV Bag Life/form Pediatric Injectable Training Hang bag at 18" height. Be certain ® clamp on administration set is Arm Simulator is now pressurized closed before hanging. and ready for venipuncture practice. Venous pressure is altered by varying D.
Page 4
Causes for Failure in Function A. IV infusion may not flow if there is air in the venous system. Simply flush the system slowly with more synthetic blood or distilled water, whichever you are using. Be sure to check the IV bag clamp; it might have been overlooked and not opened.
Page 5
3. Lubricate skin. E. Skin Replacement Pour contents of the bottle of After prolonged use for injections, Simulator Lubricant Life/form the skin on your training arm will ® provided inside arm skin and show track marks and need swish around to coat all inside replacing with Replacement Skin surfaces.
Page 6
Supplies/Replacement Parts for Life/form Pediatric Injectable ® Training Arm Simulator LF00986U Replacement Skin and Vein Kit LF01099U Tubing Sealant LF00845U Venous Blood Life/form ® — 1 Quart LF00846U Venous Blood Life/form ® — 1 Gallon LF09919U Nasco Cleaner...