ABOUT THE SIMULATOR Arterial Puncture Arm Simulator is the most realistic training simulator possible for Life/form ® demonstrating and practicing arterial injections. Visual as well as tactile realism is designed into this training aid to allow students to develop the skills necessary to learn how to draw arterial blood samples.
Figure 4 Figure 3 Figure 5 Figure 6 FILL THE ARTERIAL SYSTEM A. Hold the open tubing end over an empty container (beaker shown, not included) with the white pinch clamp on the arm open. B. Squeeze the bulb and hold (See figure 3.). C.
Page 4
Use a mild solution of Ivory® liquid detergent and water to clean the surface of the skin. Use Nasco Cleaner (LF09919U) to remove stubborn stains from the simulator. Simply apply to the soiled area and wipe clean with soft cloth or paper towels.
Page 5
Figure 10 Figure 9 Figure 11 Figure 12 SKIN AND ARTERY REPLACEMENT Removing the used skin and arterial tubing from the arm Untie the lace from the base of the arm. Lubricate the EXTERIOR of the skin using baby powder. 4.
Page 6
These materials will transfer an indelible stain. Ball-point pens will also make an indelible stain. SUPPLIES/REPLACEMENT PARTS FOR THE ARTERIAL PUNCTURE ARM SIMULATOR LF09919U Nasco Cleaner LF00998U Skin Replacement Kit with Artery Sections LF01099U Tubing Sealant LF01004U Arterial Blood —...