Introduction; Calibration - Parker SciLog DINCon Installation, Operating, & Maintenance Instructions

Table of Contents

Advertisement

Introduction

You will find the SciLog
®
of-the-art hardware and software design of the SciLog
to measure and document the conductivity, pressure or temperature of many filtration / separation
processes. With proper maintenance, the SciLog
service and performance.
Please read the following instructions carefully!
Inspections: Remove the products carefully from the shipping container. Check the contents against
the purchase order to verify that all parts are included and undamaged.
Please do the inspection now, even if the products are not used immediately. Many carriers must
receive damage claims within seven days of delivery. Please retain all packing material so unit may be
shipped safely, if necessary.
Customer Service: Parker Bioscience customer service: If assistance is required, please contact us at:
Parker Hannifin Corporation
Bioscience & Water Filtration
2340 Eastman Avenue
Oxnard, California, USA 93030
toll free: 877 784 2234
phone: +1 805 604 3400
fax: +1 805 604 3401
email: dhpsales.na@parker.com
www.parker.com/dhsingleuse
Parker customer service personnel will be able to serve you more efficiently if you have the following
information:
Serial number and model name of the equipment
Installation procedure being used
Concise list of symptoms
List of operating procedures and conditions in use when problem arose

Calibration

The SciLog
®
DIN Modules are calibrated devices, and are calibrated with test equipment that is
traceable to SI through NIST.
A Calibration Certificate is included with each unit, and has a one year expiration date.
It is highly recommended that the Module be calibrated on an annual basis or more often if your
Metrology Department deems it necessary.
Parker Bioscience provides this Calibration Service, complete with a new certificate, showing the "as
found" and "as left" data.
Contact your local Parker Bioscience representative.
6
DINCon, DINPres and DINTemp Modules and sensors easy to use. The state-
®
®
DIN Module and sensor combination allows you
DIN Modules will provide many years of excellent
Parker Hannifin Manufacturing Ltd
Bioscience Engineering Filtration
Durham Road
Birtley, Co. Durham
DH3 2SF, England
phone +44 (0)191 4105121
fax +44 (0)191 4105312
email: dhprocess@parker.com
www.parker.com/dhsingleuse

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scilog dinpresScilog dintemp

Table of Contents