Hoshizaki KM-81BAJ Service Manual page 24

5) Remove the actuator paddle from the switch mount.
6) Wipe down the switch mount and actuator paddle with 1 part of Hoshizaki "Scale Away"
and 25 Parts warm water. Rinse the switch mount and actuator paddle thoroughly with
clean water. See Fig. 3.
Actuator Paddle
7) Replace the actuator paddle back on the switch mount.
8) Replace and secure the bin control assembly back in its correct position.
9) Replace and secure the water tank back in its correct position, then replace the overflow
pipe and silicone hose back in their correct positions.
10) Move the control switch to the "ICE" position.
11) Plug the icemaker back into the electrical outlet to start the automatic icemaking
process.
12) Replace the louver back in its correct position.
Legend: BC–bin control
Proximity Switch
Fig. 3
24
Bin Control Assembly