Adjusting A Fuzzy Or Blurry Image; Fixing Partial Image Problems; Adjusting An Image That Contains Noise Or Static - Epson EF-100W User Manual

Solving Image Problems
b Adjust the image shape using the Keystone settings.
Settings > Keystone > H/V-Keystone
s
Settings > Keystone > Quick Corner
s
g g Related Links
• "Projector Feature Settings - Settings Menu"
• "Correcting the Image Shape with the Keystone Button"
• "Correcting the Image Shape with Quick Corner"

Adjusting a Fuzzy or Blurry Image

If the projected image is fuzzy or blurry, try the following steps until the
problem is solved.
a Adjust the image focus using the focus lever.
b Check the following items:
• Position the projector close enough to the screen.
• Position the projector so the keystone adjustment angle is not so
wide that it distorts the image.
c Clean the projection window.
To avoid condensation on the lens after bringing the projector in
from a cold environment, let the projector warm up to room
temperature before using it.
a
d Adjust the Sharpness setting in the projector's Image menu to improve
image quality.
e If you are projecting from a computer, use a lower resolution or select a
resolution that matches the projector's native resolution.
p.61
p.33
p.34
g g Related Links
• "Image Quality Settings - Image Menu"
• "Focusing the Image Using the Focus Lever"
• "Cleaning the Projection Window"

Fixing Partial Image Problems

If only a partial computer image is displayed, try the following steps until the
problem is solved.
a If you zoomed into or out of the image using the Zoom setting, press
the button until the projector returns to a full display.
b Make sure you selected the correct projection mode. You can select this
using the Projection setting in the projector's Settings menu.
Settings > Installation > Projection
s
c Check your computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual for
details.)
g g Related Links
• "Projector Feature Settings - Settings Menu"

Adjusting an Image that Contains Noise or Static

If the projected image contains electronic interference (noise) or static, try the
following steps until the problem is solved.
a Check the cables connecting your video source to the projector. They
should be:
• Separated from the power cord to prevent interference
• Securely connected at both ends
p.60
p.36
p.69
p.61
79