Fujitsu ESPRIMO Q55 Series Operating Manual page 90

System expansions
Installing the reader/sensor
► Remove the drive plate (a) from the drive cage.
► Attach the drive plate to the reader/sensor (b) as shown (1). The mark "Front" (Front
side) on the drive cover plate must point in front as illustrated.
► Carefully slide the reader/sensor partly into the drive bay in the direction of the arrow (2).
► Fully feed the reader/sensor cable (c) through the opening in the drive
cage (3) into the interior of the casing.
► Slide the reader/sensor fully into the drive bay (4). Take care that no cables get jammed.
► Remove the drive cage (see
► Attach the reader/sensor lead to the motherboard (see graphic on slots in Section
of the installation openings and drives in your device", Page
86
a
c
"Removing the drive cage", Page
1
1
68).
62).
b
"Overview
Fujitsu