Table of Contents
Advertisement
4.Lighting coil resistance
Disconnect the CDI magneto leads (Yel-
G
low/Red and Black).
Connect the pocket tester (Ω × 1) to the
G
lighting coil leads.
Tester (+) lead → Yellow 1 lead
Tester (–) lead → Black 2 lead
Measure the lighting coil resistance.
G
Lighting coil resistance:
0.26 ~ 0.38 Ω at 20 °C (68 °F)
5.Wiring connections
Check the connections of the entire lighting
G
system.
Refer to "CIRCUIT DIAGRAM".
Replace the voltage regulator.
*
MEETS
SPECIFICATION
CORRECT
SIGNAL SYSTEM
OUT OF SPECIFICATION
Replace the stator assembly.
POOR CONNECTION
Properly connect the lighting system.
– 21 –
–
+
ELEC
Hide quick links:
Advertisement
Table of Contents
