Worcester DIGISTAT Instruction Manual page 16
Radio frequency controlled room thermostat with twin channel digital programmer, for greenstar cdi, greenstar i junior and greenstar si models also greenstar i system and greenstar cdi system only when used in conjunction with optional integral diverter v
Table of Contents
Advertisement
OPER AT ING & INSTA L L AT ION
14
INST RUCT IONS
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk 0844 556 1818
DT20RF RECEIVER
PROGRAMMABLE SETTINGS
Setting the clock and time
1. Press the set? button until SET and CLOCK are
shown in the display.
2. Press OK to display 24hr and ON.
3. Press + to switch between 24hr and 12hr
display.
4. Decide between 24 hour or 12 hour display and
press set? to select, now the hours will flash.
5. Press + or - to set the correct hour.
NOTE: Speed up the display by holding down
the + or - buttons.
6. When the correct hour has been selected, press
set? to select, now the minutes will flash.
7. Press + or - to set the correct minutes.
8. When the correct minutes have been set, press
set? to select that setting.
Now SET and DATE will be displayed.
If the day and date needs resetting, refer to the
next page for SETTING THE DATE.
If the day and date are correct, press set? to
return to the normal display.
DT20RF PROGRAMMER
INSTRUCTION MANUAL
8 716 114 478a (08.07)
Hide quick links:
Advertisement
Table of Contents
