Azden PRO-XR Instruction Manual page 7

Use With a Camera
The PRO-XR receiver comes with a standard camera shoe mount attached for easy mounting to a DSLR camera,
mirrorless camera, or camcorder. To mount the receiver, slide the shoe mount into the camera's accessory shoe
slot. Tighten the thumbwheel to secure the receiver in the shoe slot.
3.5 mm Mic Inputs: Your camera must be equipped with a 3.5 mm microphone input jack in order to use the
PRO-XR system with it. Connect the receiver's MIC OUT jack to your camera's microphone input jack using the
included Audio Output Cable. Once connected, most cameras will automatically detect that there is an external
microphone being used. However, some cameras may require that you manually select the input audio source.
Be sure to check your camera's manual.
XLR Inputs: Some large-format, professional cameras may only have XLR inputs available for microphone
connections. If you wish to use the PRO-XR system with an XLR microphone input, this can be done with
Azden's MX-2 Mini to XLR Stereo Y Cable (sold separately). While the MX-2 provides 2 male XLR connectors, it
is only necessary to connect 1 to your equipment (does not matter which). Compatibility with balanced XLR
inputs using any other cable cannot be guaranteed.
Use With Mobile Devices
The PRO-XR may be used with smartphones and tablets for mobile video shooting and live streaming. The
PRO-XR system comes with two mobile adapter cables, both of which may be needed in order to use the system
with your mobile device. These adapter cables should grant compatibility with current Apple iPhone and iPad
models, Samsung Galaxy phones and tablets, as well as many other popular Android phones and tablets.
Also included in the box is a Smartphone Mount to facilitate the mounting of the PRO-XR receiver to your
smartphone, and your smartphone to a tripod or mobile grip.
Connecting to an Apple iOS Device with Lightning Connector
(iPhone, iPad, iPod Touch)
1. Connect the Lightning to Headphone Adapter Cable to the Lightning port of your iOS device
2. Connect the male end of the TRS to TRRS Adapter Cable to the female end of the Lightning to Headphone
Adapter Cable
3. Connect one end of the Audio Output Cable to the female end of the TRS to TRRS Adapter Cable.
4. Connect the remaining end of the Audio Output Cable to the PRO-XR receiver's MIC OUT jack (located on
the side of the unit).
Audio Output Cable
Audio Output Cable
Connect to RX "MIC OUT"
TRS to TRRS
Connect to RX "MIC OUT"
to camera's
MIC IN
Lightning
Cable
Adapter
7
iOS Device