Volvo S80 Owner's Manual page 81

03 Your driving environment
Seats
Power seat (option)
03
1 2
Front edge of seat cushion up/down
Seat forward/backward and up/down
Backrest tilt
Operation
The seats can be adjusted for a short period
after unlocking the door with the remote con-
trol without the key in the ignition slot. Seat
adjustment is normally made when the igni-
tion is on and can always be made when the
engine is running.
80
NOTE
• Only one of the power seat's controls can
be used at the same time.
• The power seats have an overload pro-
tector that activates if a seat is blocked by
any object. If this occurs, switch off the igni-
tion (key in position 0) and wait for a short
period before operating the seat again.
Seat with memory function (option)
3
Stored seat position
Stored seat position
Stored seat position
Memory button
1 2 3 4
Programming the memory
Three different seating and door mirror posi-
tions can be stored in the driver seat's mem-
ory.
The following example explains how
button can be programmed. Buttons
and can be programmed in the same
way.
To program (store) a seat position and door
mirror position in button :
1. Move the seat (and door mirrors) to the
desired position using the seat and mirror
adjustment controls.
2. Press and hold down the M (memory)
button .
3. With the memory button depressed,
press button briefly to store the cur-
rent position for the seat/mirrors.
To move the seat and mirrors to the po-
sition that they were in when button
was programmed:
1. Press and hold down button
seat and mirrors stop moving.
NOTE
As a safety precaution, the seat will stop au-
tomatically if the button is released before
the seat has reached the preset position.
until the