SmartChip and battery
information
Always turn off the phone and detach the charger
before you insert or remove a SmartChip.
To insert SmartChip and battery
1
Remove the battery cover by sliding it as shown
in the picture.
2
Slide the SmartChip into its holder. Make sure
that the gold contacts of the SmartChip are
facing down, and the cut off corner is correctly
aligned.
This is the Internet version of the user's guide. © Print only for private use.
3
Place the battery on the back of the phone with
the label side up and the connectors facing each
other.
4
Locate the notches along each side of the phone.
Using the notches as a guide, slide the back cover
upward until it clicks in place.
Style-Up™ covers.
Getting started
%
8 Replacing
5