Advertisement
STEP 2B
Route all cords, including the monitor cords through the cord funnel.
STEP 3
Gather all cords, including the monitor cords. Apply the cable zip using the provided tool.
STEP 4
Slide the end of the cable zip into the cord funnel to lock into place.
TENSION ADJUSTMENT
Patent pending Smooth Lift Technology™ makes it effortless to raise and lower your sit-stand. Place items onto the workstation and raise up to the
highest position. Lotus is shipped at the lowest setting which will help offset 10lbs/4.5kg. Turn the knob clockwise to offset heavier weights, up to 29
full rotations to offset 35lbs/15.8kg. As a guideline, approximately 10 full rotations are needed to offset a dual monitor setup. The exact number of
rotations depends on your personal comfort. Once you have properly adjusted the Lotus, it should feel effortless to raise and lower.
4
Push the Cable Zip upward
into the Cable Zip Tool.
Pull down on the Cable Zip tool while
holding the top of the Cable Zip.
Advertisement
