Table of Contents
Advertisement
Protective clothing should be worn when installing the appliance.
Care should be taken when lifting this appliance due to it's weight.
We strongly recommend a carbon monoxide detector (conforming to EN50291) is permanently fixed in the same room as the appliance.
Ensure that the Flue Terminal is not in any way obstructed and is clear of vegetation, i.e. trees, shrubs etc. and that no objects are leant
against the terminal or guard.
Always clean the Window Panel before the fire is initially ignited. Any finger prints must be removed, as these will be burnt into the glass
and will be un-removable.
Do not operate this appliance if the glass panel has been broken (or cracked), removed or is open.
The appliance is designed to fit numerous installation situations as listed in these installation instructions. However only flue approved by
ACR for this appliance may be used. 3 standard kits are available through ACR. Additional parts can be purchased from Poujoulat but must
be approved by ACR.
This appliance is a balanced flue product and is room sealed and as such requires no additional ventilation for operation. However an
adequate supply of fresh air to maintain temperatures and a comfortable environment is recommended.
This appliance is designed as a heating appliance, and as such will get very hot in operation; all surfaces (except the controls and
access door) are considered to be working surfaces and as such should not be touched. The front windows and surrounds are not consid-
ered to be fully secure guards against accidental contact. It is recommended that an approved fire screen be used if children, the elderly
or persons with limited mobility are to be present in the same area.
Do not place curtains, laundry, furniture etc. within a safe distance of 300mm of this appliance.
Do not attempt to burn rubbish on this appliance.
If this appliance is extinguished, on purpose or other, no attempt to relight should be made within 3 minutes.
Unpacking
Remove the appliance from its packaging and check for any damage or missing items before
commencing the installation.
Packing List
Appliance
Log Set
Remote control handset
Bag of embers
Glow fibre pack
Burner
Before commencing installation, confirm that the details on the appliance data plate
correspond to the local distribution conditions, gas type and pressure to which the
appliance is to be installed. Check you are in receipt of the correct gas type burner.
Ensure the gas supply and supply pipe is capable of delivering the required volume and
pressure of gas and is in accordance with the rules in force.
Installation Instructions
8
Advertisement
Table of Contents
