Table of Contents
Advertisement
Charging
1 Make sure that the battery is attached to the phone and
that the back cover is properly attached.
2 Connect the charger to the electrical outlet.
Connect the charger to the phone as shown in the picture.
The flash symbol on the plug must face upwards.
The main electrical plug may look different
Note!
depending on the electrical socket in your
country. The plug may not be used for products
other than Ericsson or Sony Ericsson chargers.
The amount of battery power indicated by your
Note!
battery icon is an estimate that may vary
depending on your charging and use patterns.
To ensure adequate power supply, keep your
battery fully charged.
Disconnecting the Charger
Move the plug connected to the phone
upwards to remove it, as shown in the
picture.
18
Getting Started
Turning Your Phone On and Off
Turn your phone On by pressing and holding the power
key ( ) until your phone turns on. The phone will beep
(unless silent mode is activated). Turn your phone Off by
pressing and holding the power key until your phone
turns Off.
Making and Receiving Calls
Making Calls
1 Press the numeric keys to enter the phone number you
want to call. The number is shown in the display.
You can press
Note!
in the display, or press and hold
all digits.
2 Press Call. The number you are dialing is shown in
the display while your phone accesses the wireless
1
network.
3 After the call is connected, the phone number that you
2
dialed, or the corresponding contact name, will remain
on your screen. The current time is replaced by the
call timer.
to erase one or more digits
C
to erase
C
Advertisement
Table of Contents
