Editing Your Voice Commands - Ericsson T60LX User Manual

Editing Your Voice Commands

Use the
VoiceCommands
commands up to date by re-recording them or deleting
the ones you do not use.
Re-recording Commands
1 Scroll to
Settings
VoiceCommands
2 Select the type of voice command and press
3 Select a voice command and press
4 Select
Replace Voice
To listen to a recorded voice command, select
.
Voice
5 Lift the phone to your ear, wait for the tone and say
the command.
You can also edit the voice command for a contact name
in in the
Edit Contact
Tips
• Try to record in an area where there is little or no
background noise.
submenu to keep your voice
, , ,
Select Voice Control
, .
Select
.
OK
and press .
Select
menu.
Phonebook
• Try to record your voice with the same equipment
that you normally use with your phone. For
example, if you normally have your phone connected
to a portable handsfree device when using voice
commands, record your voice commands when your
phone is attached to a portable handsfree device.
• If you plan to use voice functions handheld mode,
hold the phone up to the ear in the position that
,
Select
would normally be used on a call.
• Begin speaking after the tone ends.
.
Select
• You can record labels that are up to 8 seconds in
duration. Keep in mind that longer tags provide a
higher recognition rate.
Play
• Shorter tags may cause a lower recognition rate. For
example, the name "Tom" can easily be confused
with "Tim".
• Record your voice using the same tone and inflection
as you would when normally speaking. Try not to
overpronounce or speak too slowly when recording.
• When using Portable handsfree devices, you can
easily activate voice dialing by pressing the button
near the microphone until you hear a prompt.
Using Voice Commands
55