Charging Indicators; Disconnecting The Charger - Ericsson T60LX User Manual

At&t wireless
Table of Contents

Advertisement

Getting Started
Tip!
The total remaining talk time depends on the type
of battery you use and your position in the
network.
Note! The phone turns itself off when the battery can no
longer power it satisfactorily.
Note! The amount of battery power indicated by your
battery icon is an estimate that may vary
depending on your charging and use patterns. To
ensure adequate power supply, keep your battery
fully charged or carry additional charged batteries.

Charging Indicators

Attention Battery Low
Phone needs charging.
Optimized Charging
Your battery is fully charged when the meter stops
pulsing.
Charging
1 Make sure that the battery is attached to the phone.
2 Connect the charger to the electrical outlet.
18
(with a short beep)
(meter pulses continuously)
3 Connect the charger to the phone as shown in the
picture. The flash symbol on the plug must face
upwards.
Note! The main electrical plug may look different
depending on the electrical socket in your country.
The plug may not be used for products other than
Ericsson chargers.
Note! The amount of battery power indicated by your
battery icon is an estimate that may vary
depending on your charging and use patterns. To
ensure adequate power supply, keep your battery
fully charged or carry additional charged batteries.

Disconnecting the Charger

Move the plug connected to the phone
upwards to remove it, as shown in the
picture.

Advertisement

Table of Contents
loading

Table of Contents