Table of Contents
Advertisement
WAP operator technical data
Feature
WAP Browser
Version
HTML
WAP Provisioning
Total Parameter sets
Parameter set list
Manual selection
Parameter sets include
Factory pre-configuration
OTA
Simultaneous OTA
Single OTA
Bookmarks
URL format
Security mechanism
OTA provisioning (if empty)
Interface (if empty)
Re-provisioning (Set 1 filled)
Interface (Set 1 filled)
Carrier reset/provisioning
SWIM
SWIM certificate
Applicative provisioning
Preferred bearer customization
Email customization
Support in the T600/T602 for WAP
1.2.1 baseline
No
8
Name
Startpage
IP settings:
CSD phoneno., CSD Data rate, CSD dial type
IP address, datamode (conn.less or oriented)
UserId and password
Security on/off
Show images on/off
Response timer
Yes, between Analog (V32) and Digital (V110)
WAP/CSD
WAP/CSD (possibility to lock a setting)
WAP/CSD
WAP/CSD
WAP/CSD
Not empty by default
Underlined
No
No
As above
As above
Yes, but not if the set is pre-configured in the factory and locked.
Not used for provisioning.
The SWIM is only used for WAP security in WTLS connections.
Trusted certificates can be used for WTLS connections.
Yes
No
T600/T602
White Paper, September 2002
34
Advertisement
Table of Contents
