T600/T602
White Paper, September 2002
Service
Mode
SET UP CALL
General: Capability configuration
Setup speech call CallParty Subaddress
DTMF support
'00' = set up call, but only if not currently busy on another call;
'01' = set up call, but only if not currently busy on another call, with
redial;
'02' = set up call, putting all other calls (if any) on hold;
'03' = set up call, putting all other calls (if any) on hold, with redial;
'04' = set up call, disconnecting all other calls (if any);
'05' = set up call, disconnecting all other calls (if any), with redial;
SET UP MENU
SMS PP DOWN-
LOAD
User interaction with SIM AT
DISPLAY TEXT
A text string of up to 240 characters (120 UCS
coded) is supported.
Text clearing times
•
3 seconds. 60-second timeout limit for the
user to clear the text.
'Key' responses'
•
Long NO' - Proactive session terminated by
user.
•
'NO' - Backward move in proactive session.
Any other key clears display if the command
is performed successfully.
GET INKEY
Prompt for a one character input. Pressing 'YES'
without entering a character gives warning mes-
sage "Minimum 1 character".
'Key' responses'
•
CLR' clears current character.
•
'Long NO' terminates the proactive session.
•
'NO' - Backward move in proactive session.
•
'YES' - Command performed successfully.
17
GET INPUT
Prompt for character input. Pressing 'YES' with-
out entering a character gives warning message
"Minimum 'no' characters". The phone will refuse
to accept further input when maximum response
length is exceeded.
MMI Maximum Response lengths
•
SMS default alphabet characters - 160 char-
acters.
'Key' responses'
•
CLR' clears current character/characters.
•
'Long NO' terminates the proactive session.
•
'NO' - Backward move in proactive session.
•
'YES' - Command performed successfully.
SELECT ITEM
Scroll to highlight item in selection. The maximum
number of items supported by the phone within
one Select Item command, is 30.
'Key' responses
•
Down arrow — Scroll down list.
•
Up arrow — Scroll up list.
•
'Long NO' terminates the proactive session.
•
'NO' - Backward move in proactive session.
•
'YES' - Command performed successfully.
Support
in T600/
T602
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes