Basic Inspection; Engineer Functionalities; Warranty Check - Alcatel Venice 5048A Service Manual

L1&L2 Service Manual
2) Detect the wrist strap is working good by using ESD wrist strap tester, as below
4.

Basic inspection

4.1.

Engineer functionalities

Click-through steps
Input *#06# in the dial pad
Input *#2886# in the dial pad
Input *#3228# in the dial pad
4.2.

Warranty check

1. Warranty principle
Products within the warranty period and not subject to misusage or modification can be repaired
free of charge in TCL authorized Repair center.
2. Possible Out-of- warranty situations are but may not be limited to:
 Smart Care System warranty status is:"Out of Warranty". the warranty period has expired.
 The product was modified from its original design and/or software (Software modified or rooted).
 Any abnormal is detected during visual inspection (refer to <Visual mechanical check> and
<Accessories inspection>).
 LDI (Liquid Damage Indicator) is triggered or the device shows signs of liquid ingress.
 Disassembly or repair tentative from a non-authorized person or repair center.
Rev.: 1.0 Venice 5048A_I_U_Y & 5148A_I Level 1 & Level 2 Service Manual
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
TCL
Low: R<800KQ
Normal: 800KQ≤R≤9MQ
High: R>9MQ
Description
To check the IMEI number
Enter MMI test
Check current software version
Communication Ltd.
Page: 15/32