Table of Contents
Advertisement
TRIM SELECTION
The Active Trim screen shows the status of Active Trim, either ON or OFF.
Pushing the "+" button will enable the Active Trim feature.
When Active Trim is enabled, the operator will be able to select a profile that
best suits their boating preference. There are 5 adjustable Active Trim profiles.
A lower number profile applies less trim to the outboard or drive, while a higher
number profile applies more trim to the outboard or drive. Pressing the "–" or
"+" button will navigate either UP or DOWN through the profiles. This allows the
operator to fine tune the trim curve during boat operation to compensate for
differences in environmental conditions or boat loading. If there is not enough
adjustment to get the boat to trim properly, a major profile adjustment may
need to be made.
eng
PROPULSION MENU
Active Trim
ACTIVE TRIM FEATURE
OFF
[ OFF ] [ NEXT ]
MODE
Active Trim
ACTIVE TRIM PROFILE
2
[ DOWN ] [ NEXT ] [ UP ]
MODE
[ ON ]
67188
67189
53
Hide quick links:
Advertisement
Table of Contents
