Identifying And Using The Screen Categories - Mercury MercMonitor Manual

2. A detailed description of the faulty component is explained. Press the "+"
button for information on a corrective action.
a
Sensor is not working
[EXIT]
NMEA 2000/J1939 GATEWAY ALARMS
• Check Engine
• Over Temperature
• Water in Fuel (WIF)
• Water Pressure
• Low Oil Pressure
• Low System Voltage
• Engine Communication Error

Identifying and Using the Screen Categories

The monitor displays engine and vessel information through various screens.
These screens can be selected to be favorites which will flash on the screen for
a specific amount of time. The "Settings" menu option allows the screens to be
turned off or on. The "Settings" menu option also allows the calibration of the
monitor to the various different sensors like the fuel, trim, tabs, and steering to
name a few.
•
"Propulsion" contains all screens related to the propulsion system; trim,
engine performance, troll control, and Smart Tow.
•
"Vessel" contains screens related to fuel use, tank levels, tabs, GPS
data, steering position, and other items such as generators.
•
"Full Screens" displays various information from the propulsion and
vessel menu in large, easy to read letters. The full screen menu also
displays some information as "Tri Data." There are five "Tri Data" screens.
GENERAL INFORMATION
!
Alarms
AL
STBD
<Exhaust Oxygen
properly>
[ACTION]
MODE
a -
b -
b
58102
16
Detailed description
of the fault
component
"+" button to show
corrective action
eng